Português ▾

Headlight Lens Cover Wholesale Fitment Guide

Confirm ShinVea headlight lens cover fitment by make, model, years, side and lamp version, and send a photo when the version is unclear.

· ShinVea

Short answer: a wholesale order for ShinVea headlight lens covers starts with fitment, not with a generic one-size lens. Confirm the make, model, years, side if needed, and the lamp version. Send a photo of the existing lamp when the version is unclear. Some vehicles have more than one lamp version in the same year range, and left and right covers are often listed separately. The covers are replacement polycarbonate outer lenses, meant to replace a yellowed, cloudy, cracked or stone-chipped cover while keeping the original housing.

BMW X5 E70 2008-2013 Headlight Lens Cover – Left (Driver Side)
A well-formed listing: BMW X5 E70 2008-2013, left (driver side), part number 10301001L. The table prints polycarbonate (PC) with a UV-resistant hard coating, and package as one lens cover with sealant.

ShinVea — Guangzhou ShinVea Electronics Technology Co., Ltd., founded in 2015 — publishes this catalog on lensheadlight.com for distributors, installers and brands. The live FAQ is the inquiry rule this article follows.

What the catalog actually lists

The homepage and the headlight-cover category describe replacement polycarbonate headlight lens covers, listed by vehicle make, model and year, for wholesale and installer programs. The vehicle makes index groups the catalog by make: 70 makes, with the largest published counts on that page being BMW 93, Mercedes-Benz 83, Toyota 70, Lexus 52, Audi 50, Range Rover 35, Porsche 34 and Volkswagen 34. The headlight-cover category is the 813-cover line this article is about.

A separate taillight-cover category currently lists eight Range Rover-family SKUs (Range Rover, Range Rover Sport and Range Rover Evoque, left and right). That is not a full rear-lamp range. Do not treat those eight listings as proof that every make in the headlight catalog also has a taillight cover, and do not fold them into a headlight-cover purchase order.

These covers are also not projector modules and not dust covers or decorative shrouds. ShinVea’s bi-LED projector lenses are a different product line: optics that go inside a housing. A cover on this site is the outer lens, leaving the original housing in place.

How a well-formed listing is written

A complete product page gives the buyer a vehicle, a year range, a side and a part number, and it repeats the fitment warning on the page. The BMW X5 E70 2008-2013 left cover is a typical example. The page also tells the buyer that, for a pair, both the left and the right covers should be ordered. Its published table is:

Published field Value as the left-hand sheet prints it
Type Headlight lens cover
Compatible vehicle BMW X5 E70
Model years 2008-2013
Position Left (Driver Side)
Material Polycarbonate (PC) with UV-resistant hard coating
Part number 10301001L
Catalog finish Polycarbonate with UV-resistant hard coating
Package One lens cover with sealant.
BMW X5 E70 2008-2013 Headlight Lens Cover – Right (Passenger Side)
The matching right-hand cover for the same vehicle and years, part number 10301001R. Left and right are listed separately; order both for a pair.

The matching right-hand sheet for the same vehicle and years prints Position as Right (Passenger Side) and part number 10301001R. “Driver Side” and “Passenger Side” are quoted as the listings print them; they are not a legal claim about which market sits on the left. If a buyer needs a pair, say so on the inquiry. The FAQ already asks you to say whether you need a single cover or a pair, so availability can be confirmed for that vehicle and year.

Confirm the lamp version, not only the year range

The product pages, the homepage and the business-terms page repeat the same caution: headlamp versions can differ within the same model year, and fitment should be confirmed against the vehicle, model year and lamp version before an order is placed. The FAQ is more specific about how to inquire: send the make, model, years, side if needed, and a photo of the existing lamp when the version is unclear, because some vehicles have more than one lamp version in the same year range.

A year range on a listing is therefore the starting point, not a guaranteed fit for every lamp sold in those years. If two covers appear for a similar model and overlapping years, do not pick one from the title alone. Confirm the lamp version, and send a photograph when the version is not obvious. If a URL, a position row and a part-number suffix ever look hard to reconcile, confirm the listing with the quotation rather than assuming which field to trust.

Material, coatings, packing and thin pages

On the homepage and on well-formed product pages, the material is written as polycarbonate (PC) with a UV-resistant hard coating. Use that wording only. This article does not add a thickness, a second coating or a certification mark, because those values are not published on the pages fetched for this guide.

Package wording is also not a catalog-wide standard. Some well-formed sheets, including the BMW X5 E70 example above, print “One lens cover with sealant.” Other listings have no Package row at all. The FAQ says installation is typically done by a workshop — the lamp assembly is usually removed and warmed so the old sealant softens, the worn cover is taken off, and the new cover is sealed on — and that packing and any included sealant can be discussed when you inquire. Ask on the quotation; do not promise that every SKU ships with sealant.

A few listings are thinner than the BMW X5 example. The Chevrolet Epica 2004-2006, Toyota Hilux 2016-2018 and Mercedes-Benz C-Class 2011-2014 cover pages publish Type, Compatible vehicle, Model years, Material and Catalog finish, but they have no Position, part number or Package row, and their titles do not split left and right. Catalog finish on those listings may be written as “Transparent,” “Transparent, Glass,” “Transparent, Plastic,” or “Transparent, Plastic, Glass.” Material on all three still says polycarbonate (PC) with a UV-resistant hard coating. The material row wins. Do not invent a glass cover line from the finish text, and do not invent a side, a part number or a packing list that the table does not print. Confirm those details on the inquiry, with a photo if the lamp version is unclear.

What to write on the inquiry

  1. Make, model and years, in the same form as the listing where you already have it (for example BMW X5 E70, 2008-2013).
  2. Side if the cover is listed by left or right, and whether you need a single cover or a pair.
  3. The lamp version, plus a photo of the existing lamp when that version is unclear.
  4. Quantities, destination, and whether you need your own logo or packaging, including the language and whether a mark should go on the part, the box, or both.

The FAQ, homepage and business-terms page state that prices are not shown on the website, and that MOQ, lead time, payment and pricing are confirmed after the inquiry, per cover and quantity. Samples, warranty and payment terms are provided with the quotation. No numeric minimum is published, so this article does not invent one. The OEM / ODM page says private-label and packaging options are discussed per cover and order.

Contact the cover desk. Chat with ShinVea on WhatsApp or email [email protected] with the vehicle list, years, side, lamp version or photo, quantities, destination, and any logo or packaging need.

FAQ

How do I confirm the correct cover?

Send the make, model, years, side if needed, and a photo of the existing lamp when the version is unclear. Some vehicles have more than one lamp version in the same year range. A year range alone is not a guaranteed fit.

Are left and right sold as a pair?

Many covers are listed by side. Say whether you need a single cover or a pair, and the quotation will confirm what is available for that vehicle and year. On well-formed pair listings, such as the BMW X5 E70 example, the page says to order both the left and the right covers for a pair.

What material are these covers?

Well-formed pages and the homepage write the lenses as polycarbonate (PC) with a UV-resistant hard coating. If a thin listing’s catalog finish says “Glass” or “Transparent” while Material still says PC, follow the material row. Thickness and further coatings are not published.

Does every cover ship with sealant?

Not as a catalog-wide promise. Some product tables print “One lens cover with sealant.” Others have no Package row. Packing and any included sealant are discussed when you inquire.

Is this the same product as a projector lens or a taillight cover?

No. These listings are replacement outer headlight covers that keep the original housing. Projector lenses are a different ShinVea line. The current taillight-cover list is eight Range Rover-family SKUs, not a full rear-lamp range.

Is a minimum order quantity published?

No. MOQ, lead time, payment and pricing are confirmed after the inquiry, per cover and quantity. Send the vehicle list on WhatsApp or by email to [email protected].

Pedir especificações e uma cotação

Informe o veículo, os anos, o lado, as quantidades, o mercado e se precisa de logotipo ou embalagem próprios. MOQ, prazo, pagamento e preços são confirmados após a consulta.

ou envie e-mail para [email protected]
WhatsApp
QR code WeChat da ShinVea

Escaneie o QR code para nos adicionar no WeChat